Front Panel Features - Crown XTI2 SERIES XTI 1002 Operation Manual

Front Panel Features

Indicators:
Ready Indicator: Two green LEDs, one for each channel, illuminate when the amplifier is ready to produce audio.
Signal Presence Indicator: Two green LEDs, one for each channel, illuminate when the channel input exceeds -40dBu. Useful for troubleshooting cable runs.
-20 Indicator: Two green LEDs, one for each channel, illuminate when the output signal exceeds -20dB below clip.
-10 Indicator: Two green LEDs, one for each channel, illuminate when the output signal exceeds -10dB below clip.
Clip Indicator: Two red LEDs, one for each channel, illuminate at the threshold of audible distortion.
Thermal Indicator: Two red LEDs, one for each channel, illuminate when thermal compression begins due to excessive temperature conditions.
Cooling Vents:
Front to rear forced air flow.
WARNING: Never connect the output to a power supply,
battery or power main. Electrical shock may result.
page 8
Gain (Level) Controls:
Two black rotary level controls,
one for each channel.
Sel/Prev/Next Buttons:
Three buttons located
underneath the LCD screen
used to access menu items
and front panel lockout.
XTi2 Series Power Amplifiers
LCD Screen: Power Button & Indicator:
Backlit liquid crystal display Turns amplifier power on and off.
shows enabled presets and Blue LED will illuminate when
speaker processing. power is turned on.
Operation Manual