Reolink Argus PT Ultra Operational Instruction page 4

Step 3 Launch the Reolink App, click the "
Scan the QR code on the device and follow the onscreen instructions to finish initial setup.
NOTE: This device supports 2.4 GHz and 5 GHz Wi-Fi networks. It is recommended to connect the
device to 5 GHz Wi-Fi for a better network experience.
Devices Cloud
You haven't added any device. Please click
the"+"button in the top right corner to add
Set up the Camera on PC (Optional)
Step 1 Download and install the Reolink Client: Go to https://reolink.com > Support > App&Client.
Step 2 Launch the Reolink Client, click the "
and follow the onscreen instructions to finish initial setup.
5 English
" button in the top right corner to add the camera.
" button, input the UID code of the camera to add it
Charge the Camera
It's recommended to fully charge the battery before mounting the camera.
Charge the battery with a power adapter.
(not included)
Charging Indicator:
Orange LED: Charing Green LED: Fully charged
For better weatherproof performance, please
always cover the USB charging port with the
rubber plug after charging the battery.
Charge the battery with the Reolink Solar Panel
(Not included if you only purchase the camera).
English 6