Philips MAGNAVOX FW 375P Owner's Manual page 14

Dolby 3 Stereo
Normal Stereo
Use this setting when full surround is not required, but a
wide stereo sound is desirable. It only requires the left,
right and center speakers.
This setting is for normal stereo sound without Dolby Pro
Logic. It only requires the left and right speakers.
• Press DPL on the remote control (or press DOLBY PRO
LOGIC
3 STEREO
on the set) to select Dolby 3 Stereo
mode.
— The message "3 STEREO" will scroll across the
display.
— The display will be as follows:
txusnxEO •
« )) :=
o
C T r n c
r / N L. cm
• Press DPL on the remote control (or press DOLBY PRO
LOGIC OFF on the set) to select the Stereo mode.
The message "STEREO" will scroll across the
display.
The display will be as follows:
(31^
« »
— —
c
o
c n
U
L.
u
-llf /
<n>
Important!
1. For the best Dolby Pro Logic sound setting,
switch on DPL in combination with "Classic
sound".
2. Switch to normal stereo mode when you wish to
do recording on a cassette.
14