Advertisement
Top Post Mounting
The mounting plate attaches to the bottom of the wiring base with
three screws (see next page). The mounting bracket post is threaded
into the hole at the center of the mounting plate. Lock the mounting
post in position by tightening the locking knob. For additional
security, you can remove the locking knob and replace it with the hex
bolt provided. The two hex socket screws are not used in this
configuration.
Mounting Plate
Mounting Post
Screws Into Mounting Plate
Bracket Locking Knob or
Bolt (5/16 x 1 inch)
Installing the Wiring Base and Power Supply
See Side Mounting Illustration Next Page
Wiring Base
Mounting Plate to Reader Screws
(Hardware Provided with Base)
3 Mounting Holes
Adjustable Mounting Bracket
Adjustable Mounting Bracket
3–9
Advertisement
