Advertisement
3–8
Installing the Wiring Base and Power Supply
Mounting Bracket
The mounting bracket kit (Catalog No. 2755-NM42) is suitable for a
variety of applications. This bracket allows you to mount the Reader
at just about any angle or degree of rotation.
Kit Contents
The mounting bracket kit contains:
Adjustable mounting bracket
Mounting plate
Safety wire
Two hex socket screws
Hex bolt
ATTENTION: Install the safety wire when the
bracket is mounted in an inverted position. If the
!
bracket is mounted inverted and the locking knob is
loosened, the Reader could release from the bracket
and cause personal injury or damage to the Reader.
Installing the Mounting Bracket
The mounting bracket is attached to a mounting surface using three
screws (1/4 inch or M6).
É É É É É É É É É
Mounting Surface
É É É É É É É É É
The mounting holes for the bracket consist of 3 holes spaced 120_
apart on a 4 5/16 inch (109.54 mm) diameter pattern.
120_
4-5/16 inch (109.54 mm)
Diameter Bolt Pattern
120_
3 Bolt Holes
120_ Apart
Advertisement
