Honda WT20X Owner's Manual page 29

1. Changing oil
Drain the oil while the engine is still warm to assure rapid and complete draining.
1. Remove the oil filler cap and the drain plug, then drain the oil.
2. Install the drain plug securely using a new sealing washer.
TORQUE: 18 N∙m (1.8 kgf∙m, 13 lbf∙ft)
3. Refill with the recommended oil (see page 12) to the upper limit.
OIL CAPACITY: WT20X.......... 0.58 L (0.61 US qt, 0.51 lmp qt)
WT30X.......... 1.1 L (1.2 US qt, 1.0 lmp qt)
WT40X.......... 1.1 L (1.2 US qt, 1.0 lmp qt)
Wash your hands with soap and water after handling used oil.
NOTE:
Please dispose of used motor oil in a manner that is compatible with the
environment. We suggest you take it in a sealed container to your local service
station for reclamation. Do not throw it in the trash or pour it on the ground.
26
SEALING WASHER
(Replace)
DRAIN PLUG
OIL FILLER CAP
UPPER LIMIT
LOWER LIMIT