Engine Oil Level Monitor; Service Display - Opel Vivaro C 2023 Manual

The red zone indicates that the
operating temperature of the engine
is too high.
Caution
If engine coolant temperature is
too high, stop vehicle, switch off
engine. Danger to engine. Check
coolant level.
Type A
Type B

Engine oil level monitor

The state of the engine oil level is
displayed in the Driver Information
Centre for a few seconds following
the service information after switching
on the ignition.
A proper state of engine oil level is
confirmed.
If engine oil level is low, T flashes
and warning message is indicated in
the Driver Information Centre.
Depending on the version, D
flashes in the Driver Information
Centre. Confirm engine oil level by
using the oil dipstick and top up
engine oil respectively.
Engine oil 3 235.
A fault of measurement is indicated
by E or a message in the Driver
Information Centre together with
T. Check engine oil level manually
by using the dipstick.

Service display

The service system informs when to
change the engine oil and filter or a
vehicle service is required. Based on
Instruments and controls
driving conditions, the interval at
which an engine oil and filter change
is required can vary considerably.
Service information 3 274.
A required service due is displayed in
the Driver Information Centre for
several seconds after switching on
the ignition.
If no service is required for the next
3000 km or more no service
information appears in the display.
If service is required within the next
3000 km, the remaining distance to
the next service due, the distance
travelled since the last service due or
the time period that remains to the
next service due is indicated for
several seconds. Simultaneously
symbol C illuminates temporary as
reminder.
If service is required in less than
1000 km, the remaining distance to
the next service due, the distance
travelled since the last service due or
the time period that remains to the
next service due is indicated for
95