Temperature Preconditioning - Opel Vivaro C 2023 Manual

● Air conditioning and automatic
mode are automatically switched
on. The LED in the button A/C
illuminates, AUTO is shown in the
display.
● Temperature and air distribution
are set automatically and the fan
runs at high speed.
● Switch on heated rear window
è.
● Switch on heated windscreen
9.
● To return to previous mode,
press h again.
Note
If h is pressed while the engine is
running, an Autostop will be inhibited
until h is pressed again.
If h is pressed while the engine is
in an Autostop, the engine will restart
automatically.
Heated rear window è 3 28.
Heated exterior mirrors m 3 24.
Heated windscreen 9 3 28.
Stop-start system 3 156.
Deactivation of electronic climate
control system
Press s subsequently until the
electronic climate control system is
deactivated.
Temperature
preconditioning
The temperature preconditioning
allows to heat the vehicle's interior
and to ventilate the vehicle's interior
with ambient air.
The temperature preconditioning can
be programmed using the
Infotainment system.
This function is also available via the
MyOpel App.
Note
Depending on version, temperature
preconditioning can only be used via
the MyOpel App.
Note
The temperature preconditioning is
only activated if the ignition is off and
the vehicle is locked.
Climate control
If the charging level of the high
voltage battery is below 30%, the
temperature preconditioning is not
activated.
When the vehicle is plugged in,
battery charging takes precedence
over pre-conditioning.
Consequently, it can only be
activated if the battery is charged
above a threshold fixed at 80%.
If a recurrent heating / ventilation is
programmed and two heating /
ventilation procedures are carried
out without operating the vehicle, the
programming is deactivated.
Setting timer
Note
Several timers can be programmed
and saved. It is recommended to
programme temperature
preconditioning with the vehicle
plugged in, in order to optimise the
long-term perfomance of the high
voltage battery.
147