Opel Vivaro C 2023 Manual page 204

202 Driving and operating
The area displayed by the camera is
limited. The distance of the image that
appears on the display differs from
the actual distance.
Activation
Rear view camera is activated by:
● engaging reverse gear
● driving up to 10 km/h
Functionality
Different views can be selected in the
left part of the display. Change the
type of view at any time during a
manoeuvre by pressing the touch
field in the left lower zone of the
display and selecting a view from the
view selection menu:
● Standard view
● Auto mode
● Zoom view
● 180° view
The display is immediately updated
with the type of view selected.
Auto mode is activated by default. In
this mode, the system selects the
best view, standard or zoom, to
display according to the information
from the parking sensors.
The state of the system is not kept in
memory when the ignition is switched
off.
Standard view
The area behind the vehicle is
displayed in the screen. The vertical
lines represent the width of the
vehicle with mirrors unfolded. The
direction of the lines changes with the
position of the steering wheel.
The first horizontal line represents a
distance of about 30 cm beyond the
edge of vehicle's rear bumper. The
upper horizontal lines represent
distances of about 1 m and 2 m.
This view is available in auto mode or
in the view selection menu.
Trajectory lane of the vehicle is
shown in accordance with the
steering angle.
Auto mode
This mode is activated by default. If
the vehicle is equipped with ultrasonic
parking sensors, the automatic view
changes from rear view to a view from
above, as an obstacle is approached
during a manoeuvre.
If the vehicle is not equipped with
ultrasonic parking sensors, the view
needs to be changed manually in the
Info Display.