Engine Oil Level Monitor; Service Display - Opel VIVARO Owner's Manual

Hide thumbs Also See for VIVARO:
Table of Contents

Advertisement

Because of the fuel remaining in the
tank, the top-up quantity may be less
than the specified tank capacity.

Engine oil level monitor

The engine oil level monitor is correct
only if the vehicle is parked on a level
surface with a cold engine.
If the minimum engine oil level is
reached, the message OIL is
displayed in the Driver Information
Centre for 30 seconds after the
ignition is switched on. Check and top
up engine oil 3 116.
If the engine oil level is correct when
the ignition is switched on, the
message OIL LEVEL CORRECT
appears briefly in the Driver
Information Centre.
If the engine oil is above the minimum
level, press the trip computer button
on the end of the wiper lever within
30 seconds of switching on the
ignition. The message OIL LEVEL is
displayed in combination with
squares that correspond to the oil
level.
As the oil level diminishes, the
squares in the oil level display are
replaced with dashes:
▢▢▢▢▢▢ = Maximum level
▢▢▢- - - = Intermediate level
- - - - - - = Minimum level.
To exit the oil level monitor display,
press the trip computer button.
Trip computer 3 76.

Service display

When the ignition is switched on, the
remaining distance before the next
service is due may be shown briefly in
the Driver Information Centre. Based
on driving conditions, the interval at
which a service will be indicated can
vary considerably.
When the remaining distance before
the next service is less than
3000 km or 2 months, SERVICE IN
appears in the Driver Information
Centre.
When the distance reaches 0 km or
the service date is due, control
indicator A and F illuminate in the
Instruments and controls
instrument cluster and the Driver
Information Centre respectively, and
the corresponding message
SERVICE DUE appears in the Driver
Information Centre.
The vehicle needs a service. Seek the
assistance of a workshop.
Resetting the service display
After a service, the service display
must be reset. If available, select the
distance before service display in the
Driver Information Centre, then press
and hold the button on the end of the
wiper lever until the distance before
service is displayed continuously.
Trip computer 3 76.
Driver Information Centre 3 74.
Service information 3 145.
67

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents