Advertisement
kl
Front (L)
Center
Front (R)
L_£ge/Small Lj3£g_/Small/hlo
L_£g_/Small
U a I1" - Subwecfer
[
I Iress RETURN toexit__
Surround (L)
Surround (R)
Laroe/Small/No
Laroe/Small/No
*Underlined items are factory preset.
In case of surround speaker [L)
No
Large/Yes
Small/Yes
L
.=In=,-=
%,,
•
eUndedined items are factory preset.
Center delay time
(_)
Surrounddelaytime
(0 ms)
/
.peaker position
-)
Idea_ surround
speaker position
Place all your speakers within this circumference.
Center
channel balance (_
"
1
"
all
_N
0
_
Test s=gnal
_
U
ae _'_'- I
"channeISUbwecfer
m.q I_
o
o
0
;l_l
j
balance
I
Press FtETURN
t°_exit
j
(_)
Surround (L)
Surround (R)
channel balance [_L_
channel balance (_)
eUndedined items are factory preset.
Home theater
Setting the size and presence of your
speakers
]
1. Press the cursor buttons [&, V, <, I_] to select the item and
press [ENTER].
2. Press the cursor buttons [&,
T] to select the setting and
press [ENTER].
eLarge speaker icon
If the speaker supports low-frequency (under 100 Hz) reproduc-
tion.
eSmall speaker icon
If the speaker does not support low-frequency reproduction.
If you do not connect a subwecfer, it is preferable to connect front
speakers (L/R) capable of producing bass of less than 100 Hz.
]
Delay time
I
1. Press the cureor buttons [&, Y, <1, I_] toselect
theitemand
press [ENTER].
2. Press the cursor buttons [A, V] to adjust the delay time and
press [ENTER].
eCenter speaker
Set delay time to "0 ms" (factory preset) if DF is less than or
equal to Dc
if D_-Dc=
then set to
approx. 50 cm (1V2 feet)
1.3 ms
approx. 100 cm (3 feet)
2.6 ms
approx. 150 cm (5 feet)
3.9 ms
approx. 200 cm (6 feet)
5.3 ms
eSurround speakers
Set delay time to "0 ms" (factory preset) if DFand Ds are equal.
If Dr-Ds=
then set to
approx. 200 cm (6 feet)
5.3 ms
approx. 400 cm [12 feet)
10.6 ms
approx. 600 cm (18 feet)
15.9 ms
[]
Channel
balance
I
1. Press the cursor buttons [&, _r, ,<, I_] to select "Test"
and
press [ENTER[.
A test signal is output from one speaker at a time, starting with the
front left speaker and proceeding clockwise.
FRONT[L)
_
CENTER
FRONT(R)
T
1
SURROUND(L)
SURROUND(R)
2. While listening
to the test signal, press the cursor buttons
[A,
T]
to adjust the volume
of the center and surround
speakers so they are the same apparent volume as the front
speakers. (The front speakers cannot be adjusted here.)
3. Press [ENTER]. (The test signals are stopped.)
*No signal is output for the subwoofer. To adjust its volume, play
something, then return to this screen to adjust to your taste.
i,=
Advertisement
