Advertisement
1
!
1=
3
T
SLOW/SEARCH
Cursor _
buttons/
__
ENTER
_y_
9®®1---2
CANCEL__
PLAY MODE
L;lear
FL display (e.g. CD)
h_.
_L
j
Z
Flashes
QQQ
,".,
=7
-
_.'r
,
Track NO
Program No
PLAY
Advanced operations
The unit plays the tracks on a disc in the order you specify.
You can program up to 32 tracks.
1
Press [PLAY MODE] while stopped
until the illustrated
screen
appears.
olf "_"
appears on the television, press [11 STOP] to cancel
the RESUME function, then press [PLAY MODE].
2
Press
the numeric
buttons
to select
the track (.,
item _
on page 5 for number entry).
The selected track is stored in memory.
elf you press [ENTER], you can use the cursor buttons [A, V]
to select
a track.
Press [ENTER]
to register
the track
number.
eRepeat step 2 to select another track.
elf you enter over 32 tracks, the last programmed
track is
replaced with the new one.
3
Press [1_ PLAY].
Play now begins in the programmed sequence.
To exit the screen
Press [PLAY MODE] twice.
To add or change tracks
1. Press [i STOP] twice during program play to show the program
play screen.
2. Press the cursor buttons[k,
V}toselect
an available item, thec
repeat program play step 2.
ePress [4<,
Ibi_ SLOW/SEARCH]
to turn the program list pages to
make the selection faster.
To return to normal play
1. Press [11 STOP] twice during program play.
(Program play is suspended.)
2. press [PLAY MODE] twice.
3. Press [1_ PLAY].
oThe program is retained in memory.
Operation by observing the unit's FL display
eUse the numeric buttons to enter track numbers.
eTo check the program,
press the cursor buttons [&,
V]
while
stopped. Each time you press the cursor buttons [&,
V], the pro-
gram contents (track/program number) will be displayed.
I
Clearing the program
[
When the program play screen is displayed
oTo clear the programmed
tracks one by one
Select the track, move to "Clear" with the cursor buttons [&, V, _1,
I_]
and
press [ENTER],
(Selecting
the
track and
pressing
[CANCEL] also clears the programmed track.)
=To clear the whole program
Move to "Clear all" with the cursor buttons [&, V, <, I_] and press
[ENTER]. (The program is also cleared when the unit is switched to
the standby mode or turned off, or the disc tray is opened.)
m
Advertisement
