Scanning From Twain - Visioneer Strobe 400 User Manual

Scanning from TWAIN

You can scan from any TWAIN scanning application instead of scanning from the OneTouch buttons on
your scanner or the OneTouch button panel.
A Note About Your Scanner and the TWAIN standard: TWAIN is a widely recognized standard that
computers use to receive images from scanners, digital cameras, and other digital devices. The TWAIN
scanning interface can be accessed from any TWAIN scanning application you have installed on the
computer. Applications such as Nuance PaperPort and OmniPage, and many other applications, can use
the TWAIN interface for scanning.
The TWAIN interface, described in this section, is the one provided with your scanner and you will see it
when scanning from PaperPort or OmniPage. Other TWAIN compliant scanning applications may also
access this interface. However, there are some applications that have their own TWAIN interface. If you
are scanning from a software application, and see the interface shown in this section, you can use these
instructions to scan with the TWAIN interface. If you do not see this TWAIN interface, please refer to
your scanning application's user guide for instructions.
Note: You can access the TWAIN interface when you're scanning from the OneTouch software. If the
OneTouch configuration you are using is set to Configure Before Scan, and the selected option is TWAIN, the
TWAIN interface opens right away when pressing the button on your scanner without opening any other
TWAIN-compliant software first.
The PaperPort software includes a complete set of help topics that answer questions about each feature of
the software. To open the Help Topics window, press the F1 key on your keyboard or choose PaperPort
help from the Help menu.
V S 400 S U ' G 92
ISIONEER TROBE CANNER SER S UIDE