Inlet Filters / Inlet Filter Cartridge Change - L&W SC-300 E Operating Instructions Manual

M A I N T E N A N C E A N D S E R V I C E
Inlet Filters
Note
i
Dirty filters make intaking air difficult and reduce delivery capacity. Risk of compressor
overheating.
A micro filter cartridge is used as an air inlet filter. Check air inlet filter regularly or replace if
necessary. Defective air inlet filters should be immediately replaced.
Maintenance Intervals
We recommend that the filter cartridge should be replaced every 1,000 working hours (depending
on pollution grade).
Inlet Filter Cartridge Change
Inlet filter cartridge change as follows:
• Loose nut (Fig.1)
• Remove cover and replace filter cartridge by a new one (Fig.2)
• Assemble intake filter
• Tighten nut
The inlet filter cartridge change is now completed.
(Fig.1) Loose nut
LW SC-300 E / LW SC-350 E
Version: 06.12.2022
(Fig.2) Remove cover and
replace filter cartridge
(Fig.3) Mount the intake filter
Page A - 55
A