Visioneer PaperPort OneTouch Installation Manual page 36

32 O T S
NE OUCH CANNER
I G
NSTALLATION UIDE
To position a 35mm slide or negative for scanning:
1. Find the appropriate mask for the item you're scanning. The masks are in a protective plastic bag
with your scanner.
P/N:180700002060 P/N:180700002060 P/N:180700002060
Mask for 35mm slides.
2. To scan a 35mm slide, first position the 35mm mask on the glass. The mask has one square corner.
Align that corner with the arrow on the scanner body.
Make sure that the text on the 35mm mask faces up so the slide fits properly in the mask.
Follow the directions on the mask and place the 35mm slide horizontally into the slide holder.
Calibration slot
Notice that the mask has a narrow slot above the 35mm slide holder. That slot is for calibration to
assure that you get the best possible scan results. Do not place items to be scanned in the calibration
slot.
3. To scan a negative, first slide the filmstrip into the 35mm negative mask and center the frame you
want to scan in the opening.
Then position that mask on the glass and align its square corner with the arrow on the scanner body.
Make sure the text on the mask faces up.
The 35mm negative mask also has a calibration slot. Do not place items to be scanned in the
calibration slot.
You're now ready to scan the slide or negative.
To scan a 35mm slide or negative:
1. Start the PaperPort software and click the Twain icon on the toolbar.
The Scan Manager Pro appears.
Mask for 35mm negatives.