Visioneer PaperPort OneTouch Installation Manual page 20

16 O T S
NE OUCH CANNER
Select another
scanner setting if
you want it for
the item being
scanned.
Select other set-
tings here if you
want them for the
item being
scanned. You also
use these settings
to customize a
scan setting.
Click Scan to scan the
item and display it in
the application.
I G
NSTALLATION UIDE
4. Click the Preview button.
The scanner scans a preview of the item and displays it in the Scan Manager. In the example below,
the picture being scanned is a close-up of a friendly cow.
5. You can now fine-tune the options on the Scan Manager for the item you're scanning.
Note: For additional details about the Scan Manager's features click the Help button on the Scan
Manager.
Click Preview to check the
image again until it's what
you want for scanning.
6. Check the preview image. If you want to change the scanner setting for the item, click one of the
options in the list to "Scan Page For."
For example, to scan a black and white image instead of a color photo, select Black & White Photo
in the list.
See the table in the section "Selecting a Predefined Scanner Setting" on page 17 for a description of
these predefined settings.
7. To select the area to scan, drag the borders of the selection rectangle surrounding the preview image
to reduce or enlarge the area.
When you preview an item to scan, the selection rectangle around the image indicates the scan area.
However, you may want to select only a certain area of an item to scan. Selecting an appropriate scan
area can result in a faster scan and a smaller file size. See "Selecting the Area of the Item You Want to
Scan" on page 19 for details.
The scanned image's file size and available space on your computer's hard drive are shown at the
bottom left side of the Scan Manager.
8. If you want to preview the item again with the new settings, click the Preview button again on the
Scan Manager.
9. When you are satisfied with the preview image, click the Scan button on the Scan Manager.
The scanned item appears as a thumbnail image in the ScanSoft PaperPort Desktop.
To adjust the
size of the scan
area, or crop the
image, drag the
borders of the
selection rectan-
gle surrounding
the item.