BMW SEDAN 3 Series 2023 Owner's Manual page 203

System limits
System limits of the sensors
Additional information:
▷ Camera, refer to page 37.
Functional limitations
The system function may be limited and may
provide incorrect information in the following
situations:
▷ Traffic signs are fully or partially concealed
by objects, stickers, or paint.
▷ Traffic signs do not comply with the stand-
ard.
▷ In areas that are not included in the naviga-
tion system map data.
▷ If navigation system map data is invalid,
outdated, or unavailable.
▷ When roads deviate from the navigation,
such as due to changes in road layout.
▷ When driving very close to the vehicle in
front of you.
▷ When passing buses or trucks with traffic
signs applied to them.
▷ In case of electronic traffic signs.
▷ When traffic signs that are valid for a paral-
lel road are detected.
▷ In the presence of country-specific road
signs or road layouts.
Manual Speed Limiter
Principle
The Manual Speed Limiter can be used to set
a speed limit, for instance to prevent the vehi-
cle from exceeding speed limits.
Driver assistance systems
Online Edition for Part no. 01405A5F6E0 - VI/22
General information
The system can limit the speed, starting at
20 mph/30 km/h. The vehicle can be driven
at any speed below the set speed limit.
Overview
Buttons on the steering wheel
Button Function
System on/off.
Store current speed.
Speed Limit Assistant: accept sug-
gested speed manually.
Rocker switch:
Changing the speed limit.
Operation
Turning on the speed limiter
Press the button on the steering wheel.
The current speed is accepted as the speed
limit.
If the system is turned on while the vehi-
cle is stationary or driving at low speeds,
20 mph/30 km/h is set as the speed limit.
The marking in the speedometer is set to the
corresponding speed.
When the speed limit is activated, Dynamic
Stability Control is switched on and the vehicle
may change to COMFORT drive mode.
Turning off the speed limiter
Press the button on the steering wheel.
CONTROLS
203