BMW SEDAN 3 Series 2023 Owner's Manual page 199

Indicator light is illuminated: Dynamic
Stability Control has malfunctioned or
is initializing. No driving stabilization.
Have the system immediately checked by an
authorized service center or another qualified
service center or repair shop.
Automatic program change
Dynamic Stability Control can be activated
automatically by Front Collision Mitigation de-
pending on the situation.
Dynamic Traction Control
Principle
The Dynamic Traction Control is a variant of
the Dynamic Stability Control where the drive
power is optimized.
The system ensures maximum drive power
on unusual road conditions, for instance unp-
lowed snow covered roads or loose road surfa-
ces, but with somewhat limited driving stability.
General information
When the Dynamic Traction Control is acti-
vated, there is maximum traction. Driving sta-
bility is limited during acceleration and when
cornering.
A brief activation of the Dynamic Traction Con-
trol may be useful in the following situations:
▷ When driving in slush or on uncleared,
snow-covered roads.
▷ When driving off from deep snow or loose
ground.
▷ When driving with tire chains.
Driving stability control systems
Online Edition for Part no. 01405A5F6E0 - VI/22
Overview
Button in the vehicle
DSC OFF
Activating/deactivating the Dynamic
Traction Control
1. Press the button to open the selec-
tion.
2. "Traction"
TRACTION is displayed on the instrument
cluster and the Dynamic Stability Control
indicator light illuminates.
3. Press the button again to reactivate
Dynamic Stability Control.
TRACTION is no longer displayed on the
instrument cluster and the Dynamic Stabil-
ity Control indicator light goes out.
Display
In the instrument cluster
TRACTION: Displayed on the instrument clus-
ter when Dynamic Traction Control is enabled.
Indicator/warning lights
The indicator light illuminates: the Dy-
namic Traction Control is activated.
CONTROLS
199