Mitsubishi Electric MUZ-HA VF Series Service Manual page 58

11-4. MSZ-HR60VFK MSZ-HR71VFK
NOTE: Turn OFF the power supply before disassembly.
OPERATING PROCEDURE
1. Removing the panel
(1) Remove the horizontal vane (Figure 1).
(2) Remove the front panel.
(3) Remove the screw caps of the panel. Remove the
screws of the panel.
(4) Remove the screw of the Wi-Fi cover on the upper
right of the panel, and remove the Wi-Fi cover.
(5) Remove the Wi-Fi interface on the right side of the
panel. Pull out the Wi-Fi cable, and pull out the cable
tie fixed on the panel. ( )
(6) Insert Wi-Fi interface into the water cover ( ) in the
same direction as Photo 1-3, and fix it temporary.
(7) Unhook the lower part (
(8) First, hold the lower part of the right end of the panel,
and hold the lower part of the left end of the panel.
(9) Pull the panel slightly toward you, and then remove
the panel by pushing it upward.
Figure 1
OBH822H
) of the panel.
C
PHOTOS/FIGURES
Photo 1-1
Front panel
C
Screws of the panel
Photo 1-2
Photo 1-3
58
Wi-Fi interface
Screw of
Horizontal
Wi-Fi cover
vane
Wi-Fi cover
A
B
Wi-Fi interface