Table of Contents
Advertisement
Building-in
instructions
This washing machine can easily be built
_ into a kitchen unit thanks to its standard
dimensions:
Height 85 ems.
Width 60 cms.
Depth 60 cms.
:
If the appliance is to be fitted under a
kitchen counter, into a suitable recess
having the dimensions shown, you
should replace the washing machine
work-top with a sheet metal panel which
is supplied as an attachment on
application.
Proceed as follows:
a) Remove the original work-top from
the appliance after unscrewing the 4
screws securing it at the back, then
push it slightly backwards and lift it
off;
b) Remove the two blocks fixing the
work-top by unscrewing screws
fastening them to the cabinet; |
c) Install the sheet metal panel and
fasten it by means of the four screws
that come with this panel;
d) You may now fit the machine into the
special recess, beign careful that the
fill and drain hoses are not bent or
kinked in such a way as to obstruct
the normal water flow, and also
make sure that wall socket remains
easily accessible. As for the
remaining regulations covering water
& electrical connection, please follow
the directions given in the operator's
manual.
18
fig. 10
Advertisement
Table of Contents
