Operating Instructions; Cleaning And Warning - HOMCOM 820-066 User Manual

Operating Instructions

Insert Plug Into Socket
Functions
Open the door
Select the desired function:
- Fire effect (3d)
- Fan (3a) (without heating)
- Half power 900w (3a + 3b)
- Full power 1800w (3a + 3b + 3c)
- Heat and Fire effect (3a + 3b + 3c + 3d)
Fan function is necessary to activate heat functions. Without fan the heating can not run.
Adjust light of fire by rotating the fire adjustable switch (2), clockwise until desired
intensity.
To adjust the permanent temperature:
- Turn the thermostat (1) clockwise to the biggest point.
- When the room temperature goes up to be comfortable then turn the
switch (1) in an anticlockwise to break point and keep the button position.
- The function can keep necessary room temperature and also save energy.

Cleaning and Warning

Before cleaning the appliance, disconnect it from the socket and leave to cool
off.
You can clean the exterior surface of the heater with a soft, damp cloth.
Do not use cleaning or polishing products.
 Make sure that the voltage rating label on the type plate corresponds to your main
voltage. If not see your retailer and do not connect the appliance.
 Never use the appliance unsupervised when in use.
 If you have to leave even for a short moment please stop the appliance.
 Keep out of reach of children and do not allow them to operate this appliance
 Only use the appliance for domestic purposes and in the way indicated in these
instructions.
 From time to time check the cord for damages. Never use the appliance if the cord
or any part of the appliance shows any signs of damage.
 Make sure the connection cord does not touch any hot surfaces.
 Keep the appliance at least 15cm (6inches) from walls and any other thing, to
permit a good air circulation.
 Never immerse the product in water or any other liquid for any reasons. Do not use
in the shower, bath tub, or a swimming pool.
 Do not use the appliance outdoors
3