Advertisement
6
Installing the Baffle
Supports
Parts needed for this procedure:
1
Left baffle support
2
Center/right baffle support
2
Hex-head flange bolt (5/16 x 3/4 inch)
6
Flange nut (5/16 inch)
4
Carriage bolt (5/16 x 1-1/4 inches)
Procedure
1.
Remove the 4 outboard carriage bolts (5/16 x
7/8 inch) and 4 outboard locknuts (5/16 inch)
that secure the deflector bracket to the mower
deck.
Figure 12
1. Carriage bolt (5/16 x 7/8
inch)
2. Locknut (5/16 inch)
2.
Secure the left and right baffle supports to
the deflector bracket and mower deck using 4
carriage bolts (5/16 x 1-1/4 inches) and 4 flange
nuts (5/16 inch) as shown in
3.
Secure the center baffle support to the mower
deck using 2 hex-head flange bolts (5/16 x 3/4
inch) and 2 flange nuts (5/16 inch) as shown in
Figure
13.
g453182
3. Deflector bracket
Figure
13.
1. Right baffle
2. Center baffle
3. Left baffle
4. Flange nus (5/16 inch)
7
Figure 13
5. Carriage bolt (5/16 x 1-1/4
inches)
6. Hex-head flange bolt (5/16
x 3/4 inch)
7. Flange nut (5/16 inch)
g453180
Advertisement
