Advertisement
10
Installing the New Blades
Parts needed for this procedure:
3
Recycler blade (sold separately)
Procedure
WARNING
The blades are sharp. Contact with a sharp
blade can cause serious personal injury.
Wear gloves or wrap the sharp edges of the
blade with a rag.
Refer to the Operator's Manual for instructions on
installing the blades.
11
Installing the Left Belt
Cover (Gas Models Only)
No Parts Required
Procedure
1.
Assemble the left belt cover to the deck with the
3 bolts that were previously removed.
1. Bolts
2.
Assemble the left side CE cover to the left belt
cover with the 2 carriage bolts and 2 locknuts
that were previously removed.
1. Carriage bolt
2. Left side CE cover
3.
Secure the belt cover flanges with the
flange-head screw that was previously removed.
13
Figure 17
2. Left belt cover
Figure 18
3. Left belt cover
4. Flange locknut
g270503
g270474
Advertisement
