Advertisement
Figure 6
1. Right belt cover
2. Flange (left belt cover)
3.
Remove the 2 carriage bolts and 2 locknuts that
secure the left side CE cover to the left belt
cover
(Figure
7).
Figure 7
1. Carriage bolt
2. Left side CE cover
4.
Remove the 3 bolts that secure the left belt cover
to the deck and remove the cover
g270486
3. Flange-head screw (left
and right belt cover)
g270474
3. Left belt cover
4. Flange locknut
(Figure
8).
1. Bolts
4
Removing the Existing
Blades
No Parts Required
Procedure
WARNING
The blades are sharp. Contact with a sharp
blade can cause serious personal injury.
Wear gloves or wrap the sharp edges of the
blade with a rag.
1.
Lift the machine so that you can access the
bottom of the mower deck.
2.
Remove the existing blades from the spindles;
refer to the Operator's Manual for your machine.
5
Figure 8
2. Left belt cover
g270488
Advertisement
