Chengdu Ebyte Electronic Technology Co., Ltd.
Distributed IO Host (M31 Series) User Manual
3.6. DIP switch
DIP switch diagram:
Device address composition: hardware address + software offset address
The default device address is: 1 (hardware address 0 + software address 1 = device address 1).
Device address setting range: 1~255.
Hardware address: realized by DIP switch (4 bits) DIP setting (factory default is 0).
Software address: Implemented by setting the "offset address" in the configuration tool software (factory default is
1).
Example:
If the hardware address is set to 5 and the software address is set to 113, the device address is 118.
Copyright © 2012 , Chengdu Ebyte Electronic Technology Co., Ltd.
25