KitchenAid KUDE40FXBL1 Installation Instructions Manual page 24

Check that grounding clip is attached to the lower panel.
Position the lower panel behind the access panel. On some
models there is insulation on the access panel which must
fall behind the insulation on the lower panel.
? | Reinstall access panels
Hold the 2 panels together and place them against
dishwasher leg. Using a Phillips or 44" screwdriver, reinstall
the screws through the holes in the access panel and the
slots in the lower panel.
3 | Check lower panel edge
Check that the lower edge of the lower panel contacts
the floor. Adjust if necessary.
Tighten screws
Tighten access panel screws.
°
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result
in death, fire, or electrical shock.
Power supply cord—Plug into
a grounded 3 prong outlet
Plug into a grounded 3 prong outlet. Check that power
supply cord does not touch dishwasher motor or lower
part of dishwasher tub.
Reconnect Power
[4 Reconnect power }
Reconnect electrical power at the fuse box or-circuit
breaker box.