Setting The Cooking Time; Start Delay - "Ready At; Checking, Changing Or Deleting Settings; Childproof Lock - NEFF B27CR22 1 Series Instruction Manual

Setting the cooking time

Once the set cooking time has elapsed, the appliance
switches off automatically. The function can only be
used in combination with a type of heating.
Touch the # touch button.
1.
Set the type of heating and temperature.
2.
Touch the 0 touch button.
3.
The time-setting options are shown in the display.
Use the ( or ) button to set the cooking time.
4.
– Default value for the ( button = 10 minutes
– Default value for the ) button = 30 minutes
Touch the # touch button to start the set cooking
5.
time.
As soon as the cooking time has elapsed, an audible
signal sounds and the appliance ends the operation
automatically. Touch the 0 touch button to end the
audible signal.
Start delay – "Ready at"
The appliance switches on automatically and switches
off at the preset end time.To do this, set the cooking
time and determine the end time for the operation.
The start delay can only be used in combination with a
type of heating.
Notes
Ensure that food is not left in the cooking
■
compartment for too long as it may spoil.
It is not possible to start every type of heating with a
■
start delay.
Slide food into the cooking compartment on a
1.
suitable accessory and close the appliance door.
Touch the # touch button.
2.
Set the type of heating and temperature.
3.
Touch the 0 touch button.
4.
The time-setting options are shown on the display.
Select the cooking time using the ) button.
5.
Use the & button to navigate to the "* Ready at"
6.
line.
Select the end time using the ) button.
7.
Touch the # touch button.
8.
The appliance waits until the appropriate time to start
the operation.
As soon as the end time has passed, a signal sounds
and the appliance stops the operation automatically. To
cancel the signal tone, touch the 0 touch button.

Checking, changing or deleting settings

Touch the 0 touch button.
1.
The time-setting options are shown on the display.
Use the & or % button to navigate through the lines.
2.
If necessary, change the setting using the ( or )
3.
button. Set "00:00" to delete a time function.
The setting is applied automatically.
AChildproof lock
Y our appliance is equipped with a childproof lock so
C h i l d p r o o f l o c k
that children cannot switch it on accidentally or change
any settings.
Your appliance has two different locks.
Lock

Automatic childproof lock

One-time childproof lock
Note: As soon as you activate the childproof lock, the
control panel is locked. The 0 and # touch buttons are
not included.You can deactivate the childproof lock at
any time.
Automatic childproof lock
The control panel is locked so that the appliance cannot
be switched on. To switch it on, the automatic
childproof lock must be interrupted. After the appliance
operation, the control panel is locked automatically.
Activating
Touch the ± touch button.
1.
Touch the 0 touch button.
2.
Use the ( or ) button to select the "Settings".
3.
Use the & button to navigate to the next line.
4.
Use the ( or ) button to select "Automatic childproof
5.
lock".
Use the & button to navigate to the next line.
6.
Use the ( or ) button to select "Activated".
7.
Touch the 0 touch button.
8.
Use the & button to navigate to the next line to save
9.
the setting.
The "Automatic childproof lock" is activated. The
1 symbol appears on the display after switching off
the appliance.
Cancelling
Press and hold the 0 touch button until "Childproof
1.
lock deactivated" appears on the display.
Touch the ± touch button.
2.
Switch on the required appliance operation.
3.
Deactivating
Press and hold the 0 touch button until "Childproof
1.
lock deactivated" appears on the display.
Touch the ± touch button.
2.
Touch the 0 touch button.
3.
Use the ( or ) button to select the "Settings".
4.
Use the & button to navigate to the next line.
5.
Use the ( or ) button to select "Automatic childproof
6.
lock".
Use the & button to navigate to the next line.
7.
Use the ( or ) button to select "Deactivated".
8.
Touch the 0 touch button.
9.
Use the & button to navigate to the next line to save
10.
the setting.
The "Automatic childproof lock" is deactivated.
Touch the ± touch button.
11.

Childproof lock

Activate/deactivate
Via the Settings menu ~ "Basic
settings" on page 16
Via the 0 touch button
en
15