Sony TRINITRON KV-C2161D Service Manual page 22

namics
|
|
|
i
|
| | |
3-6. CONVERGENCE
Preparations :
® Before starting this adjustment, adjust the focus,
horizontal size, and vertical size.
® Minimize the brightness setting.
@ Provide dot pattern.
(1) Horizontal and vertical static convergence
Center dot
SCREEN
1. (Moving horizontally), adjust the H.STAT
control so that the red, green, and blue points
are cn top of each other at the center of the
screen. _
2. (Moving vertically), adjust the V.STAT magnet
so that the red, green, and blue points are on top
of each other at the center of the screen.
3. If the H.STAT variable resistor cannot bring the
red, green, and blue points together at the center
of the screen, adjust the horizontal convergence
with the H.STAT variable resistor and the V.
STAT magnet in the manner given below.
(In this case, the H.STAT variable resistor and
the V.STAT magnet influence each other)
nT er "
| KV-C2161D/C2561D/C2961C
RM-81€
@ Tilt the VSTAT magnet and adjust the static
convergence by opening or closing the V.STAT
magnet.
4. Ifthe V.STAT magnet is moved in the direction
of the @ and ©® arrows, the red, green, and blue
points move as shown below.
—21—