Panasonic CF-63 Series Operating Instructions Manual page 36

Dealing with Problems
# Character Input
Unable to input anything
but numerals
If
NumLK
and
KeyPad
are on, the Numeric Key Pad is ON To switch it OFF,
press
Only capital letters are
being input
If
CapsLK
IS
on. the Caps Lock is ON To switch it OFF. press ||^HI
How to input European
characten; (B, a, g) or
symbols is unclear
Select [Start] - [Run], input [c \windows\charmap exe] and press | ox | The Character
Map will be displayed Point to the desired font name and select it
• Setup Utility
[Enter Password:] or <=:(§)
is displayed
Enter the User Password or Supervisor Password If you have forgotten it. consult your
nearest Panasonic dealer
[Supervisor Setup] is not
displayed In the menu
At the start of the computer when [Enter Password ] is displayed, you have to enter the
Supervisor Password
When both the User Password and Supervisor Password have been set, if you enter the User
Password [Supervisor Setup] will not be displayed {q» page 46)
If [Supervisor Setup] is not displayed even after entenng the Supervisor Password, you have
to delete the User Password Run the Setup Utility program again and input the Supervisor
Password
[User Password] cannot be
selected
[User Password Protection] in [Supervisor Setup] may be enabled
[Coffee break Password]
or [Key Combination for
Coffee break] cannot be
selected
You need to set the User Password
[Supervisor Password]
cannot be set
If the User Password has been set first, the Supervisor Password can not be the same as the
User Password Another password needs to be entered
36