Table of Contents
Advertisement
starting Up/Shutting Down
Power Switch
Do not touch the
power switch while
your computer is en¬
tering the hibernation
mode.
Hibernation Mode
Using the hibernation function
It is necessary to set the hibernation function using the Setup Utility.
1
Run the Setup Utility
(q>
page 46)
2
Using
and [§, select [Power Management], then press
4
Using
and
select [Power Switch], set [Hibernation]
with g, then press
Close the Setup Utility
page 46)
^AUililON
Save all data before powering off your computer.
When restarting from or shutting down to the suspend or hibernation mode, do
not touch the touch pad pr move the mousefserial Of PS/2 type) if one is con¬
nected. There are cases where these devices will fail to operate; you will have to
restart your computer using the keyboard (Q»page 11).
Do not power off during; the following periods (you may corrupt your data or
file):
• While the FDD indicator (Q), HDD indicator (^) or DVD drive indicator
(@)ison.
• While playing/iecording audio files.
'
' ■
• While communications software is being used.
Do not use the suspend or hibernation function when using an OS other than
Windows 95, the diagnostics program (DIAG63), or the SetupilUtility, or when
experiencing static electricity or noise.
If you hold down on the |Q,
or
If key to enter the suspend or hiberna¬
tion mode, aflertesuming^eratioh, you must press te same k%. For example,
if you hold down on the [[■»««*[{ key while sliding the power switch, upon resum¬
ing, if you do not press the |! ♦»»»«" l[: key again, only capital letters will result from
typing.
If your computer locks up, press the reset button. All data is lost when this
button is pressed.
In the suspend mode, poWeris consumed, if PC cards (e.g., modem card) are
inserted, more of that power is consumed. When all power has been consumed,
all data at shutdown is lost since it is retained in memory. We therefore recom¬
mend plugging in the AC adapter when using the suspend function.
..y
Resuming Operation
If [Enter Password:] or security indicator (<=(s)) is displayed upon sliding the power switch,
your password has been set
{Q*page 8).
I
• Do not install or remove peripherals while your computer is in the suspend (
or
I
hibernation ( ^ and g)mode; abnormal operation may result.
I • When operation resumes, serial devices such as a mouse or modem, or your PC Cards
I
may not work. In such cases, you will need to restart your computer or reinitialize the
!
individual devices.
12
Advertisement
Table of Contents
