Download Print this page

Panasonic SC-HT80 Operating Instructions Manual page 50

Dvd home theater sound system

Advertisement

Frame
Frames
are the still pictures
that go
together to make a moving picture. There
are about
thirty
frames
shown
each
second.
F,e,d
One frame is made up of two fields.
A
regular television shows these fields one
,,_,=,m_,_=-.=_
after the other to create frames.
_=_='=_=
J=='_'_
One field
Frame
still and field
still
A still is shown when you pause a moving picture. A frame still is
made up of two alternating
fields, so the picture may appear
blurred, but overall quality is high. A field still is not blurred, but it
has only half the information of a frame still so picture quality is
lower.
UP/B
MPEG 2, the video compression
standard adapted for use with
DVD, codes frames using these three picture types.
h Intm coded picture (I-pict_e)
This is the standard picture and is a complete picture in itself. This
means it has the best picture quality and is the best to use when
adjusting the picture.
P: Predictive coded picture (P-picture)
This picture is calculated based on past I and P-pictures.
B: Bidirectionally-predictive coded picture (B-picture)
This picture is calculated by comparing
past and future I and P-
pictures so it has the lowest voIume of information.
Decoder
A decoder restores the coded audio signals on DVDs to normal.
This is called decoding.
Dolby
Digital
This method
of coding digital signals was developed
by Dolby
Laboratodes. The signals are highly compressed, enabling a large
amount of information to be recorded on one disc.
D'FS (Digital Theater Systems)
This method of coding digital signals was developed by Digital
Theater Systems. The signals are compressed at a low ratio to
maintainsound quality.
Sampling
rate
This is the number of samples of sound taken per second dudng
conversion to a digital signal. Sampling frequency is expressed in
kilohertz (kHz). A high sampling frequency results in a sound close
to the odginal when played back,
Linear
PCM
(pulse
code
modulation)
PCM is the usual digital method used for music CDs. DVDs have a
greater
volume
so they use linear PCM,
which has e higher
sampling rate.
Bltstream
This is the digital form of multiple channel audio data (e.g,, 5.1
channel) before it is decoded into its vadous channels.
Track
This is the smallest divisionon CD and video CD, and usually
equates to a single song.
Chapter
This is the smallest division on DVD and is roughly equivalent to a
track.
Title
This is the largest division on DVD.
Playback
control
(PBC)
This method of controlling disc play is included on version 2.0 video
CDs. You are able to interact with the disc through menus.

Advertisement

loading