Advertisement
| UX-A4 B/E/G/GI/EN
™ Disassembly of CD Player Ass'y and Front Panel Ass'y
© Metal Cover (Fig. 7-8)
2. Remove the one screw 6) retaining the metal cover from
to the CD player ass'y and the #6PIN connector outgo-
the back surface of the body.
ing from the door motor PC. board.
3. Dismount the metal cover while expanding it outward.
8. From the connector CN706 on the LCD microcomputer
© Front Panel Ass'y (Fig. 7-8)
P.C. board, discmount the card wire outgoing from the
From the connector CN701
on the LCD microcomputer
connector CN601 on the CD amplifier P.C. board attached
PC. board, remove the card wire outgoing from the
to the CD player ass'y.
connector CN708 on the operation key switch PC. board
9. From the connector CN705 on the LCD microcomputer
attached to the front panel ass'y, and separate the card
PC. board, dismount the #PIN parallel wire outgoing from
wire from the front panel ass'y.
FW501
on the CD amplifier PC. board.
© CD Player Ass'y (Fig. 7-8 ~
11)
1. After turning the body upside down, insert a minus screw
driver
into the
hole
@
engaging
the system
wire
inserting wire holder and the rear cover, and disengage
the holder and cover. Then, dismount the wire holder
while pulling it out.
2. Remove the two screws
retaining the rear panel from
the body.
3. After inserting a minus screw driver between the four
engagement points ©) fixing the rears cover, release the
engagements and separate the rear cover from the body.
4. After inserting a minus screw driver between the front
panel and chassis, release the four engagement points
System wire holder
() fixing the front panel ass'y, and separate the front
Fig. 7-9
Fig. 7-10
panel ass'y from the body.
:
5. Remove the two screws @) retaining both sides of the
CD player ass'y from the chassis.
6. After expanding the right and left sides of the chassis
outward, release the right and left engagements @) of
=
the CD player ass'y and chassis, and separate the CD
Z
a
player ass'y from the body.
Front panel
Rear cover
System wire
System wire holder
Fig. 7-11
@ Analytic Drawing (3) Parts List [Ml [3]
BLOCK
NO. MSMM TTT]
lal REF. | PARTS
NO.
PARTS
NAME
REMARKS
SUFFIX
SDSF30082
SCREW
CD+CHASSIS
UNIT
2
VJC2411-004
METAL
COVER
TO DECK,"AMP
SDST3006M
SCREW
CLASS
1 LABEL
FOOT
T.SCREW
WIRE
HOLDER
REAR
PANEL(CT)
NAME
PLATE
T.SCREW
T.SCREW
WIRE
HOLDER
SYSTEM
WIRE
ASY
VND4221-001
METAL
COVER
VJ F 4003-003
SBSF3008N
VYH7707-001
VJG1137-001
VYN9214-001
SBSF3008N
SBSF3008N
EMV7130-017
VMPO0092-001
SYSTEM
WIRE
94H
COON
AME
WN
FOR
SYSTEM
WIRE
JWFOL
Fig. 7-8
ae
rea
ee
(No. 1890)
29
Advertisement
