Viking DBCV3638 Installation Manual page 7

VENTILATOR KIT INSTALLATION
DiV880
(Also see instructions supplied with ventilator kit)
1. Remove front and rear filter rails from hood.
2. Lift ventilator into position inside the hood.
3. Engage (2) tabs on ventilator into (2) slots in top of hood.
4. Fasten ventilator to two (2) THREADED STUDS, using two (2) HEX NUTS (provided).
5. Plug ventilator's power cord into receptacle inside the hood.
6. Replace front and rear filter rails.
Top of
hood
Slots
Tabs
Ventilator
Rear Filter
Rail
Threaded Studs
Hex
Nuts
Filter Rail
7
Receptacle
Power
Cord
Front