Viking DBCV3638 Installation Manual page 6

VENTILATOR KIT INSTALLATION
DIV300/DiV440
(Also see instructions supplied with ventilator kit)
1. Attach DAMPER to VENTILATOR, as shown, using three (3) HEX SCREWS (provided). Note: Damper flange to be
captured by screw heads.
2. Lift ventilator into position inside the hood.
3. Fasten ventilator to four (4) THREADED STUDS, using four (4) HEX NUTS (provided).
4. Plug ventilator's POWER CORD into RECEPTACLE inside the hood.
5. NOTE: This installation does not use the mounting plate and (4) additional hex nuts. They may be discarded.
Threaded Studs
Damper
Ventilator
Hex Nuts
Top of
hood
Hex
Screws
Receptacle
Power
Cord
6