Table of Contents
Advertisement
Quick Links
Installation Manual
Submersible Sump Pumps
Models
240-Series 1/4 hp Cast Iron
240 Switchless (Manual)
241 Wide-Angle Float Switch
243 Wide-Angel Float Switch with Piggyback Plug
247 Vertical Magnetic Float Switch
230-Series 1/3 hp Poly/Aluminum
230 Switchless (Manual)
231 Wide-Angle Float Switch
233 Wide-Angel Float Switch with Piggyback Plug
237 Vertical Magnetic Float Switch
450-Series 1/2 hp Poly/Aluminum
450 Switchless (Manual)
451 Wide-Angle Float Switch
453 Wide-Angel Float Switch with Piggyback Plug
457 Vertical Magnetic Float Switch
7000 Apple Tree Avenue
Bergen, NY 14416
ph: 1-800-543-2550
fax: 1-585-494-1839
www.LibertyPumps.com
Installer: Manual must remain
with owner/operator.
Keep this manual handy for future reference.
For replacement manual, visit LibertyPumps.com,
or contact Liberty Pumps at 1-800-543-2550.
Retain dated sales receipt for warranty.
Copyright © Liberty Pumps, Inc. 2023 All rights reserved.
Record information from pump nameplate:
Model:
Serial:
Mfg Date:
Install Date:
7108000K
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Liberty Pumps 240 Series
Summary of Contents for Liberty Pumps 240 Series
- Page 1 Keep this manual handy for future reference. Serial: Bergen, NY 14416 For replacement manual, visit LibertyPumps.com, ph: 1-800-543-2550 Mfg Date: or contact Liberty Pumps at 1-800-543-2550. fax: 1-585-494-1839 Retain dated sales receipt for warranty. Install Date: www.LibertyPumps.com Copyright © Liberty Pumps, Inc. 2023 All rights reserved.
- Page 2 When used, electrical outlets shall be simplex of the pump system, or the control panel. the appropriate rating. 2 | EN Copyright © Liberty Pumps, Inc. 2023 All rights reserved. 7108000K...
- Page 3 For cord replacement: power cord must be of the same length and type as originally installed on the Liberty Pumps product. This pump has been evaluated for use with water only. Use of incorrect cord may lead to exceeding the electrical rating of the cord and could result in death, serious injury, or other significant failure.
- Page 4 For added protection, consider the addition of a back-up pump, such as Liberty Pumps SJ10 SumpJet as well as alarm ALM-P1 or Model Specifications ALM-2 in applications where loss of pump function could result in property damage.
- Page 5 Complete a visual inspection before lowering into the impeller and possible jamming. “The Brick” (Liberty Pumps basin. #4445000) is a pre-molded stable platform designed to fit the Place pump in basin being sure any mounting interface (i.e., “The...
- Page 6 To do so may void the warranty. Liberty Pumps, Inc. assumes no responsibility for damage or injury due to disassembly in the field. Disassembly, other than an authorized repair facility approved by Liberty Pumps or its authorized service centers, automatically voids warranty.
- Page 7 Route discharge piping to a lower level. If not possible, a Total head beyond pump's capability. larger pump may be required. Consult Liberty Pumps. Low liquid level. Check liquid level. Obstruction in pump or piping. Remove obstruction. 7108000K Copyright © Liberty Pumps, Inc. 2023 All rights reserved. 7 | EN...
- Page 8 Liberty Pumps, Inc. shall not be liable for any loss, damage, or expenses resulting from installation or use of its products, or for indirect, incidental, and consequential damages, including costs of removal, reinstallation or transportation.
Need help?
Do you have a question about the 240 Series and is the answer not in the manual?
Questions and answers