Table of Contents
Advertisement
Quick Links
Installation Manual
Submersible Sump Pumps
Models
240-Series
240 Switchless (Manual)
241 Wide-Angle Float Switch
243 Wide-Angel Float Switch with Piggyback Plug
247 Vertical Magnetic Float Switch
230-Series
230 Switchless (Manual)
231 Wide-Angle Float Switch
233 Wide-Angel Float Switch with Piggyback Plug
237 Vertical Magnetic Float Switch
450-Series
450 Switchless (Manual)
451 Wide-Angle Float Switch
453 Wide-Angel Float Switch with Piggyback Plug
457 Vertical Magnetic Float Switch
7000 Apple Tree Avenue
Bergen, NY 14416
ph: 800-543-2550
fax: 585-494-1839
www.LibertyPumps.com
1/4 hp Cast Iron
1/3 hp Poly/Aluminum
1/2 hp Poly/Aluminum
Copyright © Liberty Pumps, Inc. 2019 All rights reserved.
7108000J
Advertisement
Table of Contents
Related Manuals for Liberty Pumps 240 Series
Summary of Contents for Liberty Pumps 240 Series
- Page 1 450 Switchless (Manual) 451 Wide-Angle Float Switch 453 Wide-Angel Float Switch with Piggyback Plug 457 Vertical Magnetic Float Switch 7000 Apple Tree Avenue Bergen, NY 14416 ph: 800-543-2550 fax: 585-494-1839 www.LibertyPumps.com Copyright © Liberty Pumps, Inc. 2019 All rights reserved.
- Page 2 Pump Model #: For replacement manual, visit LibertyPumps.com, or contact Liberty Pumps at 1-800-543-2550. Pump Serial #: Retain dated sales receipt for warranty. Manufacture Date: Install Date: 2 | EN Copyright © Liberty Pumps, Inc. 2019 All rights reserved. 7108000J...
- Page 3 Safety Precautions For cord replacement: power cord must be of the same length and type as originally installed on the Liberty Pumps product. Use of incorrect cord may lead to exceeding the RISK OF ELECTRIC SHOCK electrical rating of the cord and could result in death, serious injury, or other significant failure.
- Page 4 Check for damaged electrical wires, especially where they exit system failure. Additionally, it creates conditions for the motor housing. discharge line blockage. Contact Liberty Pumps customer service to report any damage or Do not run dry. shortage of parts. Do not allow pump to freeze.
- Page 5 For added protection, consider the addition of a back-up pump, If the basin is not already enclosed on the bottom, provide a hard such as Liberty Pumps SJ10 SumpJet as well as alarm ALM-P1 or level bottom of bricks or concrete. Do not place the pump directly...
- Page 6 No repair work shall be carried out during the warranty period without prior factory approval. To do so may void the warranty. Liberty Pumps, Inc. assumes no responsibility for damage or injury due to disassembly in the field. Disassembly, other than an...
- Page 7 Check valve not installed, stuck open, or leaking. freedom of operation and proper installation. when fixtures are not in use. Fixtures leaking. Repair fixtures as required to eliminate leakage. 7108000J Copyright © Liberty Pumps, Inc. 2019 All rights reserved. 7 | EN...
- Page 8 Liberty Pumps, Inc. shall not be liable for any loss, damage, or expenses resulting from installation or use of its products, or for indirect, incidental, and consequential damages, including costs of removal, reinstallation or transportation.
Need help?
Do you have a question about the 240 Series and is the answer not in the manual?
Questions and answers