Page 3
For cord replacement: power cord must be of the same length corrosive fluids. Do not use in a flammable and/or explosive and type as originally installed on the Liberty Pumps product. atmosphere as serious injury or death could result.
Page 4
Check for damaged electrical wires, especially where they exit tank effluent, sewage, and drain (storm) water. the motor housing. Provide pump serial number in all correspondence and Contact Liberty Pumps customer service to report any damage or reports. shortage of parts. Complete the Start-Up Report as installation progresses.
Page 7
Larger pipe sizes may be required to eliminate friction head loss over long runs. Contact Liberty Pumps or other qualified person if questions arise regarding proper pipe size and flow rates. 3-Phase Pump Rotation Verification option 3 ...
Page 8
If guide rails are used, refer to the separate instructions supplied RISK OF ELECTRIC SHOCK with the unit for proper installation and operation, making sure all gaskets and components are present. Contact Liberty Pumps for Accidental contact with electrically live parts, items, fluid, or available models GR3 and GR4.
Page 9
Troubleshooting Liberty Pumps, Inc. assumes no responsibility for damage or injury due to disassembly in the field. Disassembly, other than at Liberty Pumps or its authorized service centers, automatically voids Refer to Table 2 for help troubleshooting issues. warranty. No repair work shall be carried out during the warranty period without prior factory approval.
Page 10
Motor stops and then restarts after short Pump operating on a short cycle due to basin period but overload A larger basin may be required. Consult Liberty Pumps. being too small. heaters in starter do not trip. Improper float switch setting.
Page 12
Liberty Engineered Products Limited Warranty Liberty Pumps, Inc. warrants that pumps of its Engineered Product line are free from all factory defects in material and workmanship for a period of 18 months from the date of installation or 24 months from the date of manufacture, whichever occurs first, and provided that such products are used in compliance with their intended applications as set forth in the Liberty Engineered Products specifications and technical manuals.
Need help?
Do you have a question about the 2LE Series and is the answer not in the manual?
Questions and answers