Liberty Pumps 260 Installation Manual

Submersible utility pump

Download this manual

Installation Manual

Model 260 Submersible Utility Pump

Contents

1.)

General Information

2.)

Operation

3.)

Troubleshooting

4.)

Maintenance

7000 Apple Tree Avenue

Bergen, NY 14416

Phone: (800) 543-2550

Fax: (585) 494-1839

www.libertypumps.com

IMPORTANT:

Prior to installation, record Model,

Serial Number, and Code Number from

pump nameplate for future reference.

MODEL ___________________

SERIAL ___________________

CODE

___________________

2603000B

Need help?

Do you have a question about the 260 and is the answer not in the manual?

Page 1 Serial Number, and Code Number from pump nameplate for future reference. Operation MODEL ___________________ Troubleshooting SERIAL ___________________ Maintenance CODE ___________________ 7000 Apple Tree Avenue Bergen, NY 14416 Phone: (800) 543-2550 Fax: (585) 494-1839 www.libertypumps.com ©Copyright 2010 Liberty Pumps Inc. All rights reserved...
Page 2 Do not install the pump on clay, dirt, mud or sand surfaces and clean the area to be pumped. Grass, mud, sand or pea gravel can clog the pump and reduce its performance. ©Copyright 2010 Liberty Pumps Inc. All rights reserved - 2 -...
Page 3 Make sure line doesn’t pass through cold frozen. areas or isn’t blocked.   Vertical lift is beyond pump’s Model 260 has a maximum lift of 30’ Total capability. Dynamic Head. Pump runs or hums but does not  Remove the pump screen and clean inlet and ...
Page 4 Liberty Pumps, Inc. shall not be liable for any loss, damage or expenses resulting from installation or use of its products, or for consequential damages, including costs of removal, reinstallation or transportation.