Advertisement
Device Installation/ 设备安装
A. SD Card Installation/ 安装 SD 卡
Use a 2# Phillips screwdriver to remove the bottom cover, insert the SD card.
使用 2# 十字螺丝刀将球机下盖卸下，插入 SD 卡。
CAUTION/ 注意
Do not attempt to remove the PTZ dome camera yourself. Do not remove the protective film from lens before
installation is complete.The related pole, ceiling, wall and brackets must be capable of bearing more than 30 Kg
weight. The installation must be stable and solid. Also, nearby magnetic field interference needs to be avoided.
禁止私自拆解球机，安装完成前切勿撕下镜头保护膜。安装此设备的立杆、天花板、墙壁和支架，需确保在承重30Kg时稳定
性较好，并确保各安装环境的牢固、可靠。同时，应避免球机附近存在磁场干扰。
B. Pole-Mounted Installation/ 立杆抱装
Open up the three hose clamps and thread them through the installation holes on the pole mount.
2
将 3 个喉箍拧开，穿过抱装支架的安装孔。
B. Pole-Mounted Installation/ 立杆抱装
1
Align the screw holes on the wall mount with the screw holes on the pole mount, and use the M8 screws to
secure the bracket.
将壁装支架上的螺孔与抱装支架上相应的螺孔对齐，拧紧 M8 螺钉。
B. Pole-Mounted Installation/ 立杆抱装
Thread the cables that need to connect to the pigtail cables of the PTZ dome camera through the pole mount
3
and wall mount. Then use the hose clamps to affix the pole mount to the pole.
将需要与球机尾线对接的线缆穿过抱装支架和壁装支架。将抱箍环绕在柱杆上，拧紧抱箍，将抱装支架固定在柱杆上。
3
Advertisement
