HearthSong Inflatable Easel Safety And Assembly Instructions

Inflatable Easel
Safety and Assembly Instructions
Includes:
Original (731501)
4 Bottles of paint (1 oz. each)
4 Shaped sponges
1 Paint brush
Prior to Assembly & Set-up:
Find the right spot. Use on flat, firm surface. Lawn should be free of rocks, depressions, sticks, etc.

Inflation:

Hand, electric, or foot pump recommended for inflation, sold separately at HearthSong.com. Please do not overinflate.
Do not inflate with an air compressor or any high-pressure hose at a filling station.
Do not inflate on rough surfaces.

Assembly:

1. Inflate all sections of the easel except the horizontal tube
at the base of the easel. Be careful not to over-inflate.
2. Use a garden hose to fill the chamber on underside of the
horizontal tube through the water valve.
3. After water compartment is filled, inflate the base tube.

Use:

Completely dry easel surface before painting. If painting surface is wet, paint won't stick to the easel as well.
Use dish soap to help remove paint from hands and fabric. Paint may stain fabrics and temporarily stain skin.
When not in use, clean, dry, deflate and store away.
#731501 | 733034 Conforms to ASTM F963. Made in China. ©HearthSong
Giant (733034)
4 Bottles of paint (2 oz. each)
4 Shaped sponges
2 Paint brushes
2020. Madison, VA 22727. 1-800-533-4397 HearthSong.com
®
Original (731501): approx. 3¼'L x 2¼'W x 4¼'H
Giant (733034): approx. 5¼'L x 3¼'W x 5'H
Step 1
Ages 3+
Adult assembly required.
Adult supervision recommended.
Takes 1 adult to assemble.
WARNING:
CHOKING HAZARD—
Small parts.
Not for children under 3 yrs.
Step 2