Woodland
HugglePod HangOut
Safety Assembly & Installation Instructions
Includes:
1 Strand of LED lights
(takes 3 AA batteries,
not included)
1 Removable cushion
Safety Checklist: Read Instructions Prior to Assembly, Installation & Use
It is imperative that you observe all relevant instructions for installation, assembly, use, and safety. Do not exceed the maximum
weight limit. Please retain these instructions for future reference.
Assembly
Tip: We recommend temporarily hanging up the HangOut by its attached O-ring for assembly. It will be easier to fi nd the features referenced in each step.
1. Insert cushion into the
zippered pocket at the bottom
of the HangOut.
#729678 Conforms to ASTM F963 Made in China. ©HearthSong
1 Leaf
topper
1 HangOut
2. Locate the four short steel rods
that will make up the top ring and
assemble into two half-circles,
using two of the included screws.
2020. Madison, VA 22727. 1-800-533-4397 HearthSong.com
®
®
*Hanging hardware not included.
See Installation section for recommendations.
3. One half-circle at a time,
making sure the screw holes
are accessible, slide each half
through the sleeve around the
top of the HangOut.
#729678 | Ages 4+
Adult assembly and installation required.
Takes 2 adult to assemble.
48"H x 45" diam. | Weight Limit: 250 lbs.
4 Short, curved steel rods
(creates top ring)
4 Long, curved steel rods
(creates bottom ring)
8 Screws
4. Connect the two half-circles with
two screws. Close the hook-and-
loop fl ap.*
5. Repeat process for bottom ring.
Need help?
Do you have a question about the HugglePod HangOut #729678 and is the answer not in the manual?
Questions and answers