Warranty - Dexter Laundry 12SD2-25RC.1A Original Instructions Manual

PROBLEM
SPARKING VISIBLE THROUGH THE
HOUSING AIR VENTS
UNSATISFACTORY RESULT
STORAGE AND TRANSPORTATION CONDITION
STORAGE
EN
This product :
- Must be stored in a dry place.
- Must be stored away from sources of high temperatures and exposure to sunlight.
- Must avoid sudden temperature changes during storage.
- Must be stored without packaging is not allowed.
- Must be stored in the manufacturer's packaging in warehouses at an ambient temperature of +0 to
+40°С. Humidity should not exceed 80%.
TRANSPORTATION
This product :
- Must be transported in closed vehicles in accordance with the rules for the carriage of goods in force on
this type of transport.
- During transportation and handling operations, the packaging with the product should not be subjected
to sharp impacts and the effects of precipitation.
- When unloading / loading, it is not allowed to use any type of equipment that works on the principle of
clamping the package.
- Must be transported at ambient temperature from −20°С to +50°С. Relative air humidity should not
exceed 90%.
- After transporting the device in winter conditions, it is necessary to keep it at room temperature for at
least 2 hours until the moisture is completely dry.
PROTECT OUR ENVIRONMENT
CAUTION! This product has been marked with a symbol relating to removing electric and electronic waste.
This means that this product shall not be discarded with household waste but that it shall be returned
to a collection system which conforms to the European WEEE Directive. Contact your local authorities or
stocks for advice on recycling. It will then be recycled or dismantled in order to reduce the impact on the
environment. Electric and electronic equipment can be hazardous for the environment and for human
health since they contain hazardous substances.

WARRANTY

Dexter & UP20 products are designed to the highest DIY quality standards. We offer a 60-month warranty
for DEXTER product (tool), and a 36-month warranty of UP20 products (charger & battery) from the date
of purchase. This warranty applies to all material and manufacturing defects which may arise. No further
claims are possible, of whatever nature, direct or indirect, relating to people and /or materials. Dexter
products are not intended for professional use.
In the event of a problem or defect, you should first always consult your Dexter dealer. In most cases, the
Dexter dealer will be able to solve the problem or correct the defect.
Repairs or the replacement of parts will not extend the original warranty period.
102
POSSIBLE CAUSE
A small amount of sparking may be
visible through the housing vents
Drill bit is worn or not adapted to
the material to drill
SOLUTION
This is normal and does
not indicate a problem
Replace with new bit or
check the compatibility
between drill bit and
material to drill