Important Notes On Assembly - Roland DigitalDelay DD-3 Service Notes

Jun. 2010

Important Notes on Assembly

Installing the Output Jack
* Ensure that the wiring is not pinched.
fig.assemble-1.eps
* Be sure not to let the Output jack touch the case.
fig.assemble-2.eps
Installing the Direct Out Jack
Solder the wiring from the Direct Out jack to TP69 and TP81 on the Main
Board.
fig.assemble-3.eps
TP81
TP69
Installing the Input Jack
* When installing, be sure to hold down the Input Board with your hand and keep
the jack from tilting at an angle.
fig.assemble-4.eps
fig.assemble-5-e.eps
DD-3(T)
OK
Not OK
7