Exmark VERTEX X Series Operator's Manual page 15

Table of Contents

Advertisement

1. Forward
2. Neutral
3. Reverse
4. Throttle-fast
5. Continuous variable setting
6. Throttle-slow
7. Engine–off
8. Engine–on
9. Engine–start
146-3598
X-Series Non-EFI Models Only
10. Optional light accessory
11. Warning—Read the Operator's Manual. Do Not operate
this machine unless you are trained. Wear hearing
protection.
12. Warning—Stay away from moving parts; keep all guards
in place. Stop engine and remove key before adjusting,
servicing, or cleaning.
13. Warning—Disengage PTO, move drive levers to neutral
position, engage parking brake, and stop engine before
leaving the operator's position
14. Thrown object hazard—Pick up objects that could be
thrown by mower. Keep bystanders away. Keep deflector
in place.
15. Crushing/dismemberment hazard of bystanders—Do Not
carry passengers, look forward and down when operating
the machine, look behind and down when reversing.
16. Tipping hazard—Mow across slopes not up and down. Do
Not mow wet slopes–use extreme caution when operating
on slopes.
17. Tipping hazard—Do Not use dual ramps when loading
onto a trailer; use one ramp wide enough for the machine;
back up the ramp when loading the machine and drive
forward off the ramp when unloading.
18. Tipping hazard—Do Not use the machine near drop-offs
or on slopes; stay at least two widths of the machine away
from drop-offs.
15
Safety
decal146-3598

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vertex s series

Table of Contents