Page 1
PFM C Art.-Nr. 35000 Original Instructions Rokamat PFM C (22AF0890) 2014/30/EU, 2006/42/EG, 2012/19/EU, 2011/65/EU, 2001/95/EG, EG No. 1907/2006 EN 62841-1:2015/AC:2015, EN 62841-2-4:2014/AC:2015, EN ISO 12100:2010-11 4) Kammerer GmbH, An der B 10, 75196 Remchingen Remchingen, 20.01.2022 Beate Kammerer Head of Technical Documentation...
PFM C en English accessories cannot be adequately guarded or Never lay the power tool down until the ac- These symbols are (also) on the device. Contents controlled. cessory has come to a complete stop. The spinning accessory may grab the surface and Symbols .................
- The supporting plate [3-4] must be removed be- Emission levels The PFM C is intended for use with original ROKA- parts are missing or damaged. fore the trowel [4-1] is mounted (see above).
Equipment and Batteries and Accumulators tool during operation. This impairs the cooling of If problems other than those listed occur, please contact your ROKAMAT service workshop or your local and Waste Batteries and Accumulators and the power tool. Conductive build-up can impair the specialist.
Need help?
Do you have a question about the PFM C and is the answer not in the manual?
Questions and answers