Page 1
Hedgehog W Art.-Nr. 69600 Original Instructions Rokamat Hedgehog W (22IGC0093) 2014/30/EU, 2006/42/EG, 2012/19/EU, 2011/65/EU, 2001/95/EG, EG No. 1907/2006 EN 62841-1:2015/AC:2015; EN 62841-2-4:2014/AC:2015; EN ISO 12100:2010-11 4) Kammerer GmbH | An der B 10 | D-75196 Remchingen Remchingen, 20.01.2022 Beate Kammerer...
Page 3
Hedgehog W en English accessories cannot be adequately guarded or Never lay the power tool down until the ac- These symbols are (also) on the device. Contents controlled. cessory has come to a complete stop. The spinning accessory may grab the surface and Symbols .................
Page 4
Take a break when the machine is heated up els“): The hand-held electric tool Rokamat Hedgehog W strongly and let it cool down again. To that let the Switching off: Switch off the PRCD (TEST) [2-2].
Page 5
CAUTION! hands at the gripping surfaces. tool during operation. This impairs the cooling of Use only original ROKAMAT spare parts and work 7. Switch on the device. the power tool. Conductive build-up can impair the Risk of damage to the device! tools! 8.
Page 6
(correctly). activated. ply. Nozzle blocked. Unblock the blocked area. Lever valve blocked. Unblock the blocked point. Lever valve defective. Replace lever valve. If problems other than those listed occur, please contact your ROKAMAT service workshop or your local specialist.
Need help?
Do you have a question about the Hedgehog W and is the answer not in the manual?
Questions and answers