Advertisement

Quick Links

Gex
Art.-Nr. 85000
1)
Rokamat Gex (21GX0673)
2)
2014/30/EU, 2006/42/EG, 2012/19/EU, 2011/65/EU,
2001/95/EG, EG No. 1907/2006
3)
EN 60745-1:2009/A11:2010, EN 60745-2-3:2011/A2:2013 +
A11:2014 + A12:2014 + A13:2015, EN ISO 12100:2010-11
4) Kammerer GmbH, An der B 10, 75196 Remchingen
Remchingen, 15.04.2021
Beate Kammerer
Head of Technical Documentation
© Kammerer GmbH. Printed in Germany. Technical information and illustrations are not binding
and subject to change without notice. BA_Gex_EN_001
EN
Original Instructions
ROKAMAT
Kammerer GmbH
An der B 10
75196 Remchingen
Deutschland
3
www.rokamat.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Gex and is the answer not in the manual?

Questions and answers

Summary of Contents for ROKAMAT Gex

  • Page 1 Art.-Nr. 85000 Rokamat Gex (21GX0673) Original Instructions 2014/30/EU, 2006/42/EG, 2012/19/EU, 2011/65/EU, 2001/95/EG, EG No. 1907/2006 EN 60745-1:2009/A11:2010, EN 60745-2-3:2011/A2:2013 + A11:2014 + A12:2014 + A13:2015, EN ISO 12100:2010-11 4) Kammerer GmbH, An der B 10, 75196 Remchingen Remchingen, 15.04.2021 Beate Kammerer...
  • Page 2 1-12 1-11 1-13 1-10...
  • Page 3: Table Of Contents

    en English e] The outside diameter and the thickness of k] Position the cord clear of the spinning acces- Confirms the conformity of the power tool Contents your accessory must be within the capacity sory. If you lose control of the power tool, the with UK legislation.
  • Page 4: Intended Use

    - Wear appropriate protective equipment, such as Don’t put the running motor on the ground! Dirt may ble vacuum cleaner. The Gex is only intended for dental contact with wheel and sparks which could respirators able to filter microscopically small get sucked in and cause damage.
  • Page 5: Device Components

    en English Telescopic tube [2] Maximum tool diameter 150 mm CAUTION! Driver disc M12x1,5 / 10 mm - Open the clamping screw [2-3]. Before switching on the power tool: Unpack - Move the telescopic tube [2-4] to the desired po- Tool holder weight 2,9 kg power tool and accessories and check that no...
  • Page 6: Working With The Power Tool

    CAUTION! on our homepage: www.rokamat.com. ing so, swing the long neck grinder in overlap- Use only original ROKAMAT spare parts and work ping movements to smooth the surface to the The two boreholes for the push button at the tools! required fineness.
  • Page 7: Troubleshooting

    Suction hose blocked or kinked. Remove blockage and straighten hose. Disposal bag full. Dispose of the bag. Slide ring damaged. Replace slide ring. If problems other than those listed occur, please contact your ROKAMAT service workshop or your local specialist.

This manual is also suitable for:

85000

Table of Contents