ROKAMAT Skate Original Instructions Manual

Advertisement

Quick Links

Skate
Art.-Nr. 93000
1)
Rokamat Skate (22BG0211)
2)
2014/30/EU, 2006/42/EG, 2012/19/EU, 2011/65/EU,
2001/95/EG, EG No. 1907/2006
3)
EN 62841-1:2015/AC:2015, EN 62841-2-4:2014/AC:2015,
EN ISO 12100:2010-11
4) Kammerer GmbH, An der B 10, 75196 Remchingen
Remchingen, 20.01.2022
Beate Kammerer
Head of Technical Documentation
© Kammerer GmbH. Printed in Germany. Abbildungen unverbindlich.
Technische Änderungen vorbehalten. BA_Skate_EN_001
EN
Original Instructions
ROKAMAT
Kammerer GmbH
An der B 10
75196 Remchingen
Deutschland
3
www.rokamat.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Skate and is the answer not in the manual?

Questions and answers

Summary of Contents for ROKAMAT Skate

  • Page 1 Skate Art.-Nr. 93000 Original Instructions Rokamat Skate (22BG0211) 2014/30/EU, 2006/42/EG, 2012/19/EU, 2011/65/EU, 2001/95/EG, EG No. 1907/2006 EN 62841-1:2015/AC:2015, EN 62841-2-4:2014/AC:2015, EN ISO 12100:2010-11 4) Kammerer GmbH, An der B 10, 75196 Remchingen Remchingen, 20.01.2022 Beate Kammerer Head of Technical Documentation...
  • Page 2 Skate...
  • Page 3 Skate en English Confirms the conformity of the power tool accessories cannot be adequately guarded or Never lay the power tool down until the ac- Contents with UK legislation. * controlled. cessory has come to a complete stop. The spinning accessory may grab the surface and Threaded mounting of accessories must Symbols .................
  • Page 4 2 of the operating instructions. - The supporting plate [4-4] can be detached/re- Always use original ROKAMAT abrasives. Foreign The hand-held electric tool Rokamat Skate is in- Tool holder moved. abrasives are not suitable for the speed of the...
  • Page 5 Check the plug and the cable regularly in order to - Loosen bolt [3-1] and allow to engage. avoid a hazard. Use only original ROKAMAT spare parts and work tools! During the warranty period do not loosen the Telescopic tube [3] screws on the housing.
  • Page 6 Material to be processed is too Allow material to dry longer. moist. Too much pressure on the sur- Reduce contact pressure. face. If problems other than those listed occur, please contact your ROKAMAT service workshop or your local specialist.

This manual is also suitable for:

93000

Table of Contents