ROKAMAT GEX Translation Of The Original Instructions

ROKAMAT GEX
ROKAMAT GEX P
TRANSLATION OF THE
ORIGINAL INSTRUCTIONS
WARNING Read and follow all safety warnings and instructions to
prevent operating errors and to reduce the risk of injury.
Failure to follow all safety warnings and instructions may result in
electric shock, fire and/or serious injury.
Keep all safety instructions and information for future reference.
Pass on your power tool only together with these documents.
ROKAMAT GEX and GEX P are state of the art and have been constructed
in accordance with the acknowledged safety regulations.
CAUTION GEX and GEX P are EASY-SLIDE grinders; please do
not press the machine during grinding process!
Angle Adjusting
Pull the lever for adjusting the required grinding angle of the machine head to get the optimal posture towards the
respective working face. Take care that both index bolts get engaged when released to fix the grinding angle.
Machining Floors
Set the fork in upright
position and hold the
sander inclined to the
floor.
Machining Walls
Angle the fork in a way that
the tool head is placed at a
right angle to the fork.
Machining Ceilings
Set the fork in upright
position and hold the
sander inclined to the
ceiling.
Renovation Grinder
Parquet Grinder
Technical Data:
Tool n :
0
Motor:
Weight tool:
Max. Grinding tool-ø:
Tool holding device-ø:
Safety class I
GEX: Reference-No. 85000
Valid from serial No. 15GX0072
GEX P: Reference-No. 84000
Valid from serial No. 16GP0002
Machining Floors
Take care that the fork is
not angled.The gaiter must
not get squeezed.
.
Machining Walls
Take care that the fork is
not upright. The gaiter
must not get squeezed.
.
Machining Ceilings
Take care that the fork is
not angled. The gaiter must
not get squeezed.
-1
2600 – 9150 min
230 V ~ 1500 W
3,1 kg
150 mm
12 mm