Navigation - ABB SACE Emax 2 Instructions Manual

2 - Navigation

Levels and pages The Ekip Touch menu is divided into several levels, all accessible using the touchscreen display and
10 | © 2023 ABB | 1SDH001316R1002 - ECN000297030
buttons available in the units:
Level 1 (HOME)
Page shown on power up; appears when push-button of the same name appears, as described on page
9; from here you can:
1. access the MAIN PAGE (level 2), by pressing the HOME button
2. access the Alarm list , by selecting the diagnostic bar at the bottom
3. access the Summary pages of some of the measurements by pressing on the edges
Level 2 (MAIN PAGE)
This page allows you to:
4. access one of the graphic pages: Histograms , Measuring instruments and Measurements
5. access the MENU AREA (level 3)
Level 3 (MENU AREA):
You can access all the configuration menus and consult the parameters in this page
6. Protections and Advanced
7. Measures
8. Settings
9. Test
10. About
Level 4 (MENUS and SUBMENUS)
Selection of one of the level 3 menus accesses a set of submenus with the list of available options, which
are organized into several levels through to details of the specific parameter.
Each submenu has a command for returning to the previous menu (11); if the list contains more than five
options, there is also a scroll bar (12) for full consultation.
L evel 1
Figure 3
L evel 3
L evel 2
ABB | SACE Emax 2
L evel 4
Ekip Touch - Interface and menus
2 - Navigation